Agriculture 16mm Solid Poly Drip Irrigation Tubing

agriculture 16mm  solid poly Drip Irrigation Tubing

Features of drip irrigation pipe :
1. The round dripper is produced first by high-precision mould,then stuck to PE hose. 
2. The dripper which is directly welded inside the pipe has slight pressure loss and 
    accurate distribution.
3. Good anti-block property, smooth flow channel and even water distribution.
4. There are two kind of drippers: pressure-compensation and nonpressure-
    compensation, suitable for different terrain.    
5. Different diameter, wall thickness and dripper spacing can be produced.
6. The most significate feature is that it can be used over 5-8 years.
     It's durable and widely used in open field irrigation.

Advantages:
The most versatile product in our catalog and one of our best sellers. In-Line Emitter tubing is standard 5/8" polyethylene tubing with either 2L/H,3L/H,4L/Hemitters extruded into the tubing at the factory. Since the emitters are already installed, all you do is roll out the tubing and connect it to your main water source. The cost is just slightly higher than if you inserted the emitters yourself, but the installation time is greatly reduced. In-Line Emitter Tubing can be used on long or short rows, flat or hilly terrain, raised beds, in loops around trees, or in straight lines for hedges and windrows. We offer this in a variety of emitter spacings.

Specification of drip irrigation pipe/tube: